Guangxi Pinglu Group Company Limited

Summer is coming and many household products need careful maintenance, otherwise adverse change is easy to occur in humid summer, affecting service life. So do household aluminium windows and doors. Here are seven tricks to help you maintain aluminium windows and doors.

1. When using aluminium windows and doors, you should be gentle, when push and pull, let nature take its course. Don't pull hard or push hard before troubleshooting. Soot formation and deformation are major reasons why push-and-pull of aluminum alloy doors and windows is hard. Keep the door frame clean, especially the push-and-pull tank. Cleaner can be used to suck the soot formation in grove and ordinary wool top.

2. When cleaning aluminium alloy doors and windows, you should not trample on the aluminium frame, don't take pull box as support, either.

3. Cleaning aluminium alloy doors and windows can make use of soft cloth dipped in water or neutral detergent, do not use plain soap and detergent, moreover, do not use strong acid and alkali cleanser such as household cleanser and bathroom cleaning chemicals.

4. After rain, wet glass and frame of doors and windows should be wiped, special attention should be paid to dry chute. Chute that has been used long, its friction force will increase, adding a little oil or wax oil fire can help.

5. The connection of the aluminium alloy frame should be often checked, tighten bolts in time and replace the damaged parts. Damageable parts of aluminium alloy doors and windows like positioning pin, wind brace and floor spring should be checked often, and add lubricating oil regularly to keep them clean and flexible.

6. Seal strip and glass glue sealing are keys to guarantee sealed heat preservation structure of the doors and windows, repair and replace timely if they are off.

7. Check junction of the aluminium alloy box wall, after being used for a long time, if there is any loose, the overall framework will be deformed easily, causing the door cannot close and seal. So the screw of the connection should be immediately fastened if it is loose, if screw footing loosens, epoxy super glue with a small amount of cement should be applied to cement.